Xtrem Version:
berylium tweeter, ultimate duopole, Xtrem internal wiring, external crossover
$ inquire for pricing
Standard Finish:
lacquer finish in all RAL colors
Custom Finishes:
leather, piano lacquer, aston martin paint
$ inquire for pricing
Frame Finishes:
anodized silver, rose gold, yellow gold
$ inquire for pricing
Black Duopole:
$ inquire for pricing
`````````````````````````````````````````````````````````````````
Full Scale System. No limits.
The Evo 4 is the highest achievement in AudioNec’s Evo line. This dual tower loudspeaker offers, thanks to its uncompromising design and components, the ability to effortlessly play any type of music, even in large rooms. With nothing less than eight 15 inch (38cm) subwoofers per pair, and 10 drivers per channel, it is capable of playing from infrasound’s at high levels without any distortion to the highest harmonics up to 45kHz in impressive clarity and speed. In short, Evo 4 is an Evo 3 Signature enhanced with two impressive subwoofer towers making the difference.
The speaker of all superlatives
With its two towers, one equipped with four 15 inches drivers, the Evo 4 defies all laws of acoustics and enters the legend of great systems approaching absolute perfection. Here it is no longer a question of speakers but of VIP seats in the first row of the best concert hall with a full orchestra playing! You will be immersed in the heart of the orchestra and will be able to feel the slightest intention, the smallest inflection even of a musician placed at the back of the stage. The real dimension of the concert hall will become that of your listening room. You may even feel you are the conductor. Well, almost…
`````````````````````````````````````````````````````````````````
EVO LINE
DuoPole 31
A unique driver for a unique sound
The DuoPole 31 is a unique box-less wideband driver, proprietary technology of AudioNec, capable of reproducing musical frequencies from 400Hz to 10kHz with exceptional efficiency and dynamics. Its ultra-light diaphragm with its vertical voice coil, without any spider, working in free air and dipole mode, allows it to reproduce the slightest musical nuance with a sense of detail, rhythm and acoustic power unknown to this day. Each musical information is transcribed in all its dimensions: attack, harmonies, envelope curve and an incomparable holding and instinction of each note.
Its double cylinder shape without suspension, recreates a wave propagation mode close to the horn, ensuring a dynamic diffusion with a high level of efficiency, moreover with a wide multidirectional spatial dispersion close to 360 degrees. Its open air diffusion mode also eliminates any box effect, so no creation of undesirable standing waves. Thus, the music flows without constraints in all its spontaneity and veracity.
Super Tweeter
Up to 45kHz
To reproduce high frequencies, a high efficiency super tweeter is placed just above the DuoPole for an ideal phasing. It is placed in a horn-shaped structure to ensure the most omnidirectional spatial dispersion possible without edge effects and its silk dome diaphragm allows perfect harmonic and tonal continuity.
One can say that there is no point in having tweeters that go up so high in kHz because no instrument emits such frequencies. This is not entirely wrong. But every musical note emits higher order harmonics that can be perceived by human even though it is known that the human ear cannot hear sounds above 20kHz at best. We have done many tests and each time we have been able to appreciate the benefits of equipping our speakers with a high quality tweeter.
Low frequency drivers
Down to 18Hz
To ensure the reproduction of low frequencies below 400Hz, down to 18Hz depending on the Evo model, very high quality woofers and subwoofers are used. They are mounted in separate cabinets to ensure perfect vibration isolation and are designed either bass reflex or sealed according to their frequency reproduction band. They are also made of the same type of material as the DuoPole membrane for perfect harmonic and tonal coherence.
Modular connectivity
Each Evo is equipped with 4 high quality binding posts to allow each owner to connect their speakers in a simple version using the Evo jumpers (made from a single large 2mm thick pure copper plate) or using the 4 binding posts for bi-wiring or bi-amplification. The terminals are not mounted directly on the anodized aluminum plate but on polymethyl methacrylate plates to avoid the creation of micro magnetic side effects that could alter the musical signal. The crossover delivers the signal to each driver through the highest quality internal wiring made of 6N OCC copper cables perfectly insulated running inside the lateral massive aluminum CNC machined bars.
A unique design for a unique sound
In addition to allowing modularity and evolution of each Evo loudspeaker towards the superior model, the principle of separate cabinets was thought to ensure a phonic isolation of each driver almost perfect. Each driver being in a completely separate and discontinuous cabinet from the others, its inevitable parasitic vibrations are not transmitted to the others. The choice of high density MDF for the speaker cabinets is also an essential technical choice because it is an acoustically neutral material with a structural behavior that intrinsically absorbs the maximum amount of vibrations.
Cabinet isolation for pure sound
Each driver emitting the audio signal without internal parasitic air pressure sent to other drivers was also part of the specifications that led to the design of the Evo line. Each independent cabinet is linked to the others through the massive lateral CNC machined aluminum bars system bringing strength and stability.
Depending of their weight, the Evo speakers are equipped with spikes for Evo 1, and sophisticated feet for Evo 2, Evo 3 and Evo 4. Those High-End feet are precisely CNC machined, they use carefully selected high grade materials able to support heavy weights and super hard ceramic balls in order to guarantee the most effective suppression of unwanted resonances and the very best listening experiences.
Xtrem
The passive crossover of the loudspeaker is built in an external box, which allows us to use non-standard components without compromise and without size constraints. The Xtrem version of the AudioNec Duopole wideband driver linked to the beryllium tweeter makes the musical quality going even further on all the criteria, such as: definition, dynamics, quality of the timbres, sound stage size, smoothness, presence…
|
