The phenomenon of “cable break-in” has been experienced by many audiophiles. Interconnects, speaker cables and even power cords seem to go through a conditioning period when used in an audio/video system, and will sound better after many hours of in-system use.

The Cable Cooker is the gold standard for not only speeding up the break-in time, but also for improving the sound well beyond natural break-in by simply playing music for hundreds of hours.

Includes 9 Power Cord Adapters.

Amazing improvements can be achieved using the Speedblock on electronics to reduce the mechanical resonances in transformers, power supplies, chassis's ect...

The effects are greater transparency, better image focus, wider & deeper soundstage and lowering of the noise floor.

Amazing improvements can be achieved using the Bigblock and Speedblock on electronics to reduce the mechanical resonances in transformers, power supplies, chassis's ect...

The effects are greater transparency, better image focus, wider & deeper soundstage and lowering of the noise floor.

The audible effects of most resonances of your Hi-Fi equipment and loudspeakers can effectively be reduced by using one of the most suitable M-Block of our accessory program. Best impact in damping for use on rattling covers of CD drive assemblies, pre and power amplifiers, phono stages, power supply housings and cheap constructed speaker housings, too.

product offered: M-Block 8055

Upgrade or build your own power cords with these top level audiophile IEC plugs.

ISOLATE noise from the network and get better sound 

Disconnects electrical connection between devices connected together via Ethernet network, prevents current flow, ground-loops & AC hum which effectively eliminates noise in modern audio systems resulting in better sound quality.

For signal paths use RCA RF Isolators onto the blank input/output sockets and use AG RF Isolators onto the blank Power Bar sockets.

Both Isolators serve the function of blocking off the harmful airborne RF flow to the equipment.

Constructed of high quality Copper.

Units constructed of two materials of hard and soft hardness to dampen and absorb micro mechanical vibrations.

Designed to be placed underneath existing tip toes for enhanced performances.

Steel parts polished and Chrome plated.

Units constructed of two materials of hard and soft hardness to dampen and absorb micro mechanical vibrations.

Designed to be placed underneath existing tip toes for enhanced performances.

Steel parts polished and Chrome plated.

Rix Rax were known for exotic woodworking masterpieces. The frame is built from steel, which is finished in piano black powdercoat. The shelf is maple with exotic wood inlay. The stand is on rotating wheels which make it easy to move around. These amp stands can easily hold any amount of weight due to their exceptional build quality. 

This is one of two amp stands currently available; dimensions below:

Amp Stand One: 21 x 19 x 10 inches / Wide x Deep x High

Amp Stand Two: 24 x 20 x 10 inches / Wide x Deep x High

The SOLITAIRE is a 150WRMS Integrated Amplifier. It best embodies the sculptural design and "lack-of-sound" philosophy of Metaxas & Sins. 

Machined from a solid block of aircraft aluminum, it's totally bespoke and the modular electronics make it future-proof. Even the circuit boards can be CNC machined from 1mm solid silver coated clear polystyrene.

Custom finish in Porsche blue metallic. 

One of the best sounding Ethernet cables available.

Purest SILVER & GOLD conductors offers unbelievable listening pleasure. Extremely high bandwidth of the cable will elevate sound quality of your system to a level you could not even imagine.

The Pink Faun Digital Cable Series are all made by hand by our own craftsmen. Each digital cable is designed for its specific task. All of these fully-handmade cables have one very important feature in common: they are made with our in-house developed, non-inductive tin-plated copper conductors, extruded through a framework of ultra-low dielectric fabrics and PTFE tubing.

During the design of the Pink Faun Digital cables, we approach digital as an analogue signal that’s interpreted as 1 or 0 by the sender and receiver. The Digital Cable Series are all designed to minimize the influence of the cable while transporting the digital signal. Our cables are very neutral, without any harshness or coloration. If you are looking for tight, fast and rhythmic digital interlinks, the Pink Faun Digital series will deliver: No Sound, Just Music!

The Pink Faun Digital Cable Series are all made by hand by our own craftsmen. Each digital cable is designed for its specific task. All of these fully-handmade cables have one very important feature in common: they are made with our in-house developed, non-inductive tin-plated copper conductors, extruded through a framework of ultra-low dielectric fabrics and PTFE tubing.

During the design of the Pink Faun Digital cables, we approach digital as an analogue signal that’s interpreted as 1 or 0 by the sender and receiver. The Digital Cable Series are all designed to minimize the influence of the cable while transporting the digital signal. Our cables are very neutral, without any harshness or coloration. If you are looking for tight, fast and rhythmic digital interlinks, the Pink Faun Digital series will deliver: No Sound, Just Music!

BMC MonoS unbalanced RCA cables are configured so that the signal conductor consists of a monocrystalline silver cable, while the return (ground) connection uses two monocrystalline silver cables, with the shielding connected only at the receiver end.

Made of ten ultra-thin high purity copper wires, pairwise twisted and casted into nylon, shielded by an extra apiral-wire. 

"You will be amazed by their natural sound and musicality".

Made of three ultra-thin high purity copper wires, pairwise twisted and casted into nylon, shielded by an extra apiral-wire. 

"You will be amazed by their natural sound and musicality".

Made of ten ultra-thin high purity copper wires, pairwise twisted and casted into nylon, shielded by an extra apiral-wire. 

"You will be amazed by their natural sound and musicality".

Made of ten ultra-thin high purity copper wires, pairwise twisted and casted into nylon, shielded by an extra apiral-wire. 

"You will be amazed by their natural sound and musicality".

Audiotop Vinyl 1 is a special detergent for use with vacuuming record cleaning machines. The extraordinary cleaning power is immediately audible due to the smooth and silent groove gliding and improved detail of the recorded music. To further enhance the result we recommend the after-treatment, Vinyl 2.

An Audiotop exclusive: A fluid that reduces the friction caused by the motion of the stylus in the record groove. After applying the special fluid Audiotop Vinyl 2 the diamond glides more smoothly and quietly in the record groove reducing friction and increasing stylus contact. This increases the dynamics and facilitates the reproduction of full audio frequencies and a stable output.

Massively over-engineered and beautifully hand crafted footers offering a solid support and vibration control properties. Each footer is a combination of a specially chosen stainless steel and our premium quality Italian slate in Constrained Layer Damping (CLD) configuration.

Isolation by a combination of machined aluminum, ultra-hard ceramics, and soft polymer.

Applicable for electronic components, turntables, monitor loudspeakers, and equipment platforms.

Isolation by a combination of machined aluminum, ultra-hard ceramics, and soft polymer.

Applicable for electronic components, turntables, monitor loudspeakers, and equipment platforms.

The SPA22 is a 5x120W integrated A/V amplifier and digital controller and is the natural successor to the award winning SPA21, which was recognised around the world for its ease of use and ‘hi-fi’ sound quality. As the first of a new generation of Primare home entertainment products however, the SPA22 represents a considerable evolutionary advance in terms of design, performance, user flexibility and versatility.

Only an optimal adjustment of tone arm and pick-up geometry will enhance the quality and resources of your analogue audio components. Due to the sophisticated design of our protractor-set and many experiences in listening and comparing, we proudly present a complete set considering different user profiles, both for professional sellers and vinyl lovers.

Perfect tool for the adjustment of your tone arm and pick-up. The edges and lines of our acrylic block were built in a complex laser-cutting procedure. This is the best solution for arms with conical tubes as for example SME series V.

Have a look through the highly transparent block and compare the parallelism of the marked lines with the center line on the pipe. 

The 8switch by English Electric (a Chord Company brand), is an 8 port GbE Ethernet switch modified and upgraded to our specific requirements for high-performance music streaming networks.

Kraken sets the bar so high that few cable companies will ever reach this level of performance. 

A true stand-alone statement in the vast realm of audio power cables; uniquely designed, visually stunning, hand made entirely with proprietary components and utterly invincible.

For use on all high-end audio components.

These Kraken cords include our latest plugs and housing designs.

The Stealth Audio Cloude 99 power cable is made of 99.997% pure solid silver.

The 560 is engineered to give full power and smooth full bass response that is clean, detailed, and never bloated. Use the 560 on all your high-current demand gear such as power amps and line conditioners.

A highly optimized and shielded linear power supply with noise filtration. Built around a toroidal transformer, and available in multiple voltages, Sboosters are compatible with a wide variety of components.

Boost the performance and lower the noise floor of Roon core computers, NAS's, DAC's, streamers, turntables, and even network switches and routers. The improvement is often two-fold: the chosen component receives clean, dynamic power, and a noisy switching power supply polluting all components is taken out of the system.

MODEL:  5 V - 6 V <> 6 V - 1.75 A, 5.5 V - 2.5 A, 5 V - 3 A

The MARQUIS “Memento Mori” is a sublime, minimalist Preamplifier + Headphone amplifier “sculpture” designed for music-loving audiophiles who require few functions but insist on the purest sound.

Ikeda Sound Labs IST-201 Step-Up transformer is best suitable for low impedance 1 Ohm - 6 Ohm MC cartridges. These low impedance cartridges will be able to work at their full potential by virtue of this high quality MC transformer.

IST-201 is the ideal transformer with a lesser internal loss so that you will be able to enjoy a supreme sound in combination with IKEDA 9 series and our flagship cartridges as well as other brands of low impedance cartridges.